Product Products
Products 产品中心
MTP/Female to MTP/Female 72 Fibers OM4 50/125 Multimode Trunk Cable, Type A, Elite, Plenum (OFNP)SpecificationsConnector AMTP Female eliteConnector BMTP Female eliteFibre Mode50/125μm OM4Jacket ColorAquaPolish TypePC to PCJacket MaterialOFNR, OFNP, LSZHInsertion Loss≥ 20dBFiber GlassCORNING or equivalent fiberPloarityMethod AWavelength850/1300nmStorage Temperature-40°C to +85°COperating Temperature-10°C to +70°CInstallation Tensile Load66 NLong-Term Tensile Load50 NFeatures· 0.35dB Ultra Low IL with USCONEC Connectors.· Corning or YOFC fiber is designed to pass ISO, IEC, RoHS. etc. standards.· Bend insensitive fiber cable shows a great performance on resilience.· K=K carton package provides max protection on your items.
MDC connector is a Very Small Form Factor (VSFF) duplex optical connector designed for termination of Multi-mode and Single-mode fiber cables up to 2.0mm in diameter. The MDC connector is manufactured with proven 1.25mm ferrule technology used in industry standard LC optical connectors, meeting IEC 61753-1 Grade B insertion loss requirements.Features: • Two 1.25mm ferrules in one connector housing• Push-pull boot for connector insertion and extraction• Simple polarity reversal with no exposed fibers • Meets IEC 61753-1 Grade B insertion loss requirements • Telcordia GR-326 and TIA-568 compliant • Designed for cables up to 2.0mm OD • MM, SM and SM APC available • 3x fiber cabling density over LC
The 1U modular high-density optical fiber distribution frame (Product Name: GPX33) provided by Adtek adopts the assembly mode of 24F module box, which supports MPO / MTP pre termination, pigtail fusion and wiring mode. The module box has higher compatibility, and is convenient for replacement and expansion and different wiring scheme selection. The maximum capacity of 1U is 144F and 6 module boxes.Product featuresPre terminated modular design for easy replacement and expansionPull out design, each layer can be pulled separatelyThe module box supports pre termination, welding and wiringThe module box supports 8 / 12 / 24F MPO terminationEach layer can be equipped with two 24F module boxes, and each module box can be independent pullingMaterial: cold-roll steel sheets, the surface is sprayed...
Site Navigation

0086 755 83545255

 Add: 4 Floor, JinQi Wisdom Valley, Nanshan, Shenzhen
Tel: 0086 755 83545255
Zip Cord: 518055     Fax: 0086 755 83545271

电话:+86 0755-2955 6666
传真:+86 0755-2788 8009

Copyright@2017 Shenzhen Adtek Technology Co., Ltd