LANGⅴ
CN
EN
Rescourse  
Case News Center

Does Cat6 on Cat5e Patch Panel or Cat5e on Cat6 Patch Panel Work?

Time: 2017-11-15
Views: 33

In the market, there exist both Cat5e patch panel and Cat6 patch panel. We know that Cat5e patch panels are meant to be used with Cat5e cable, and Cat6 patch panels are meant to be used with Cat6 cable, but what’s the difference between Cat5e and Cat6 patch panels? Can I use Cat6 cable on Cat5e patch panels or can I use Cat5e cable on Cat6 patch panels? Answers will be provided in this blog.

Does Cat6 on Cat5e Patch Panel or Cat5e on Cat6 Patch Panel Work?

Can I Use Cat6 on Cat5e Patch Panel?

There isn’t much practical difference in the patch panels themselves. There is a difference in the wire gauge specified between Cat5e and Cat6. The cat6 wire is thicker. Cat6 usually has 23 AWG copper conductors compared to only 24 AWG in Cat5e cable. Another factor making Cat6 a larger wire than Cat5e is the fact that between each of the four pairs in a Cat6 cable there is a spline that will separate each pair from one another. Separating the pairs helps reduce cross-talk between the pairs and gives you a better signal. However, this spline also increases the diameter of the cable. Regardless of the size difference in Cat5e vs Cat6, the fact was that Cat6 cable is backward compatible with Cat5e. Yes, Cat6 is often times a larger cable, but this in no way affects its use with Cat5e patch panels. Feel free to use Cat5e patch panels if you already have them. You can always upgrade them later.

Can I Use Cat5e on Cat6 Patch Panel?

In addition to using Cat6 on Cat5e patch panel, we may also across some situations where we want to use Cat5e on a Cat6 patch panel. According to the passage above, we know that Cat6 cable is thicker than Cat5e, so if I use Cat5e on a Cat6 patch panel, will it be too loose? Although Cat6 individual twisted pairs insulation is usually thicker than Cat5e, this is usually never a problem with termination, only with how many cables you can stuff through a piece of conduit. So, will a Cat5e cable be “looser” terminated on a Cat6 jack, slightly yes, but electrically it will still make contact and work fine. But you should mind that your cabling channel will default to the lowest Catx component. Even though the patch panel says Cat6, with Cat5e cables you should only expect Cat5e performance on those jacks.

Conclusion

When punching down Cat5e wire on a Cat6, the Cat5e wire is enough smaller that it is possible to get what looks like a good punch, but the insulation on the wire is not actually penetrated or is only partially penetrated by the vampire jaw of the punch block. When punching down Cat6 wire on a Cat5e panel, the larger wire can end up bending or even breaking the vampire jaws on the punch down block. In both cases, using care and testing each connection, you can usually make it work. If you’re just doing one panel at home you are probably OK. Although it can both work well, we don’t recommend to do like this. Use the Cat5e on Cat5e patch panel and Cat6 on Cat6 patch panel will get the best performance. Adtek provide both high-density Cat5e patch panel for Fast Enthernet applications and Cat6 patch panel for 1-Gigabit Enthernet applications.


Case / Related news
2017 - 12 - 06
Type-B Polarity MTP Cable User GuideAs demand grows for higher speed, large data centers being built today have begun to make preparations for 40G/100G transmission. MTP cables, with great performance...
2017 - 11 - 15
In the market, there exist both Cat5e patch panel and Cat6 patch panel. We know that Cat5e patch panels are meant to be used with Cat5e cable, and Cat6 patch panels are meant to be used with Cat6 cabl...
2017 - 11 - 15
Traditional optical cabling solutions such as duplex patch cords and duplex connector assemblies work well in application-specific, low-port-count environments. But as port counts scale upwards and sy...
2017 - 11 - 07
Many people may be confused about what is cloud computing and what is data center. They often ask questions like, “Is a cloud a data center?”, “Is a data center a cloud?” or “Are cloud and data c...
Close】【Print
Site Navigation

0086 755 83545255

 Add: 4 Floor, JinQi Wisdom Valley, Nanshan, Shenzhen
Email: sales@adtek.com.cn    
Tel: 0086 755 83545255
Zip Cord: 518055     Fax: 0086 755 83545271

电话:+86 0755-2955 6666
传真:+86 0755-2788 8009
邮编:330520

Copyright@2017 Shenzhen Adtek Technology Co., Ltd